Once the Radar is detected, TimeZero can be open. Once the Radar and Computer are on the same network, the Radar Installation Wizard is used to detect the radar on the network. Please refer to the documentation of your Router. That way the radar will always keep the same IP address (easier for future troubleshooting). If your router can “reserve” specific IP address for specific hardware (using the MAC address), it is recommended to reserve one for the Radar. However, there is no guarantee that the radar IP address will never change in the future (because the Router can dynamically assign new IP address). This can be useful for troubleshooting (ping the radar). Note: The Radar Setup Wizard will show you the IP address of the Radar (default Nickname). You should not have to configure the IP addresses. In this case the Radar will automatically assign itself an IP address of 192.168.0.1 / 255.255.255.0 and you will have to manually set the computer with an IP address on that same subnet (usually 192.168.0.100/255.255.255.00).Ĭonnection via a Router (DHCP Server): If you have a router on the network (with DHCP capability), the Radar and the PC will automatically get their IP addresses from the router. In order for TimeZero to display and control the radar, the PC and the Radar must be on the same IP network and subnet.ĭirect Connection or connection via HUB/Switch: The Koden InSight Radar operates on 192.168.0.x / 255.255.255.0 if there is no router on the network. The InSight Radar connects to the PC through the control box using an Ethernet connection (100Base-T). TimeZero is also compatible with the Ethernet 2kW Dome Radar (MDS1R and MDS8R Koden radars). TimeZero is compatible with all the MDS Ethernet InSight Radars (Koden radars with MDS5 or MDS6 control box). Please note that TimeZero is only compatible with Ethernet Based Radar (it is not compatible with older Serial 2kW dome or with the IR2BB) Introduction The "InSight Radar Module" needs to be unlocked prior to configure an InSight 2 series Radar in TimeZero.
0 Comments
Leave a Reply. |